Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
Barrel Cleaning
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="MontanaRifleman" data-source="post: 482515" data-attributes="member: 11717"><p>I have tried lots of different cleaning products and the two best by far are Bore Tech Eliminator and Wipeout.</p><p></p><p>With BTE soak a patch and wet the bore good. Pass a nylon brush through a few times to work it in. Wait 20 min and dry patch out. Repeat until you see no more blue, then repeat and wait 40 min. Repeat until you see no more blue and your barrel should be almost perfectly clean. </p><p></p><p>With Wipeout, spray down the bore and make sure you have a wad of paper towel in the chamber to keep it from spraying down into the action. Let it soak for 8 hrs, dry patch and repeat until the dry patch shows no more blue. Your bore is now down to bare metal. BTE is quicker and Wipeout requires less effort.</p><p></p><p>-Mark</p></blockquote><p></p>
[QUOTE="MontanaRifleman, post: 482515, member: 11717"] I have tried lots of different cleaning products and the two best by far are Bore Tech Eliminator and Wipeout. With BTE soak a patch and wet the bore good. Pass a nylon brush through a few times to work it in. Wait 20 min and dry patch out. Repeat until you see no more blue, then repeat and wait 40 min. Repeat until you see no more blue and your barrel should be almost perfectly clean. With Wipeout, spray down the bore and make sure you have a wad of paper towel in the chamber to keep it from spraying down into the action. Let it soak for 8 hrs, dry patch and repeat until the dry patch shows no more blue. Your bore is now down to bare metal. BTE is quicker and Wipeout requires less effort. -Mark [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
Barrel Cleaning
Top