Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Reloading
Barnes 171g. match burner for 7mm
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="Topshot" data-source="post: 921600" data-attributes="member: 13285"><p>I run a .312" neck. Cases are turned to a loaded diameter of .309"</p><p>Throat is very long with the bullets just seated into the neck above the donut.</p><p>The 171 Barnes is loaded to a COAL of 3.156" 0.010" into the lands. I use a CCI LR 200 primer.</p><p>Load is 56.5gn of AR2213SC (H4831sc) with a velocity of over 3000fps.</p><p>I get excellent benchrest level accuracy with this load. </p><p></p><p>This is a special load for a custom cut chamber, do not use it for standard factory cut chambers. Work up your load.</p></blockquote><p></p>
[QUOTE="Topshot, post: 921600, member: 13285"] I run a .312" neck. Cases are turned to a loaded diameter of .309" Throat is very long with the bullets just seated into the neck above the donut. The 171 Barnes is loaded to a COAL of 3.156" 0.010" into the lands. I use a CCI LR 200 primer. Load is 56.5gn of AR2213SC (H4831sc) with a velocity of over 3000fps. I get excellent benchrest level accuracy with this load. This is a special load for a custom cut chamber, do not use it for standard factory cut chambers. Work up your load. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Reloading
Barnes 171g. match burner for 7mm
Top