Anyone else doing this.

Discussion in 'The Basics, Starting Out' started by royinidaho, Dec 9, 2005.

  1. royinidaho

    royinidaho Writers Guild

    Messages:
    8,853
    Joined:
    Jan 20, 2004
    Chuck up a nylon NOT a brass/bronze brush of the proper caliber and clean the inside of the neck and see if you think you can get away without lube.

    Switched to this method quite awhile ago and am satisfied.

    I guess this begs the question, should I be satisfied?
     
  2. sewwhat89

    sewwhat89 Well-Known Member

    Messages:
    773
    Joined:
    Jul 26, 2005
    I use a nylon brush, but I don't run through enough cases at a given sitting to substantiate setting up the drill, etc. I can find no fault with the nylon brush.
     

  3. jb1000br

    jb1000br Well-Known Member

    Messages:
    1,307
    Joined:
    Jul 8, 2003
    Ultrasonic will take that crap out...no brush needed /ubbthreads/images/graemlins/wink.gif

    JB
     
  4. bailey1474

    bailey1474 <strong>SPONSOR</strong>

    Messages:
    1,922
    Joined:
    Dec 7, 2004
    [ QUOTE ]
    Ultrasonic will take that crap out...no brush needed

    [/ QUOTE ]

    You've gotta stop this!!!! I'm going to have to go out and buy one!!!!
     
  5. Jimm

    Jimm Writers Guild

    Messages:
    1,270
    Joined:
    Jun 12, 2007
    OK, OK OK,

    There that 's my best imitation of /ubbthreads/images/graemlins/blush.gif whoever he was /ubbthreads/images/graemlins/laugh.gif
    I'm with Bill, what unit , where to buy how mucho dineros ?

    Jim
     
  6. 7Rumloader

    7Rumloader Well-Known Member

    Messages:
    540
    Joined:
    Jan 20, 2005
    Jimm here is a link to the report jb did on the ultrasonic cleaning method. Link
    Looks pretty cool. May have to give it a try myself.
     
  7. jb1000br

    jb1000br Well-Known Member

    Messages:
    1,307
    Joined:
    Jul 8, 2003
    Sorry -- missed this Jim -- check the link above, has lots of info and pics /ubbthreads/images/graemlins/wink.gif

    JB
     
  8. Nodak7mm

    Nodak7mm Well-Known Member

    Messages:
    181
    Joined:
    Jun 18, 2001
    Works great, used to drop em in at shift start, pull em at lunch. Definatly squewky clean. Side benefit of working on turbines.. All the neat tools and compounds.. Miss the borescope too... Ahh the good ol days. After reading Jasons article, thought I'd add I just used what was in it, standard stodderd solvent... Took longer, tho...

    If you have access, use it, works great..

    Rod
     
  9. royinidaho

    royinidaho Writers Guild

    Messages:
    8,853
    Joined:
    Jan 20, 2004
    yea but, wouldn't the nylon brush be faster. I reload 50 to a 100 at a setting?

    Also I'm not a clean freak, but I do clean the primer pockets and when I get a bushing die I won't even mess with the inside of the necks. Or is that a bad thing?

    I don't tumble cases but clean the outside of the neck w/GM Top Engine stuff. Best I've found, so far....
     
  10. Jimm

    Jimm Writers Guild

    Messages:
    1,270
    Joined:
    Jun 12, 2007
    Roy, Roy , Roy ,

    You are swimming upstream /ubbthreads/images/graemlins/laugh.gif Get you a vibrator /ubbthreads/images/graemlins/blush.gif or JB will hound you to the ends of the earth /ubbthreads/images/graemlins/grin.gif /ubbthreads/images/graemlins/blush.gif /ubbthreads/images/graemlins/laugh.gif /ubbthreads/images/graemlins/crazy.gif

    Jim Brown
     
  11. royinidaho

    royinidaho Writers Guild

    Messages:
    8,853
    Joined:
    Jan 20, 2004
    Nay! Nay! Patrucio, thou shalt never taint me! /ubbthreads/images/graemlins/grin.gif /ubbthreads/images/graemlins/grin.gif /ubbthreads/images/graemlins/grin.gif

    (a little Shakespeer or was it Shakesierra, on ya) /ubbthreads/images/graemlins/ooo.gif
     
  12. Jimm

    Jimm Writers Guild

    Messages:
    1,270
    Joined:
    Jun 12, 2007
    I wish that we had the "rolling on the floor " graemlins at times and ...........this is one of them !!!!:D /ubbthreads/images/graemlins/laugh.gif /ubbthreads/images/graemlins/laugh.gif You are too funny Roy /ubbthreads/images/graemlins/grin.gif

    However , I think there is a ultrasonic in my future /ubbthreads/images/graemlins/cool.gif

    May your celebration of the birth of Christ be filled with joy !

    Jim Brown