Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Reloading
Another 7mm-08 Question
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="catamountsierra" data-source="post: 1869502" data-attributes="member: 79865"><p>I used H4350 behind 140gr BTs and ABs, as well as behind the 150gr ABLR. It worked well in my 24" barrelled Rem700. Temperature stability seemed good, though I didn't do a whole lot of testing. I ran a COAL of 2.825" with both bullets and case fill was right around 100%, usually could just feel a hair of compression on the powder as I hit the end of the seating stroke. I was getting 2825fps with the 140s and 2750fps with the 150s.</p></blockquote><p></p>
[QUOTE="catamountsierra, post: 1869502, member: 79865"] I used H4350 behind 140gr BTs and ABs, as well as behind the 150gr ABLR. It worked well in my 24" barrelled Rem700. Temperature stability seemed good, though I didn't do a whole lot of testing. I ran a COAL of 2.825" with both bullets and case fill was right around 100%, usually could just feel a hair of compression on the powder as I hit the end of the seating stroke. I was getting 2825fps with the 140s and 2750fps with the 150s. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Reloading
Another 7mm-08 Question
Top