Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Videos Of Tech Stuff And Reviews
Annealing Cases
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="loaders_loft" data-source="post: 278700" data-attributes="member: 10540"><p>In the past couple weeks I was able to set up and anneal my brass for 7wsm and 35 whelen. I purchased a halo-style torch from woodchuckden.com, which turned out to provide uneven heat on cases standing in a tray of water. So, I attached the holders from the hornady annealing system to my cordless screwgun, to spin cases while heating with the halo torch. It worked pretty good, once I got the "magnum" holder drilled out wider to accept the WSM case. After spinning in the flame, I flipped each case into a coffee can of water, occasionally dunking the holder as well, to keep it cool.</p><p> </p><p>Next, I was able to lightly neck turn the 7wsm brass. Hopefully this freshly annealed and turned brass will yield more uniform groups!</p><p> </p><p>Like most other reloading activities, the annealing and neck turning chores turned out to be fairly simple, with a bit of technique involved...</p></blockquote><p></p>
[QUOTE="loaders_loft, post: 278700, member: 10540"] In the past couple weeks I was able to set up and anneal my brass for 7wsm and 35 whelen. I purchased a halo-style torch from woodchuckden.com, which turned out to provide uneven heat on cases standing in a tray of water. So, I attached the holders from the hornady annealing system to my cordless screwgun, to spin cases while heating with the halo torch. It worked pretty good, once I got the "magnum" holder drilled out wider to accept the WSM case. After spinning in the flame, I flipped each case into a coffee can of water, occasionally dunking the holder as well, to keep it cool. Next, I was able to lightly neck turn the 7wsm brass. Hopefully this freshly annealed and turned brass will yield more uniform groups! Like most other reloading activities, the annealing and neck turning chores turned out to be fairly simple, with a bit of technique involved... [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Videos Of Tech Stuff And Reviews
Annealing Cases
Top