Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
Advice wanted on rifle calibers
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="Trickymissfit" data-source="post: 868909" data-attributes="member: 25383"><p>the 250AI's only draw back is that the neck length is a little on the short side before fire forming, and you'll loose another .035". The good side is that you'll never have to trim cases often. Personally, I'd form my cases from .243 brass as you'll see less brass movement during fire forming. Plus you can trim the necks to the max the chamber will allow before fire forming (-.010"). Brass may only shorten about .025" this way, and .243 brass is very common.</p><p> </p><p>I know a couple guys that shoot that round for ground hogs and coyotes all the way out to five hundred yards. If memory is right they pretty much use nothing but 85 thru 90 rain bullets. Both use short action Remingtons, and the loaded rounds cycle thru the action very well. I'd love to have a Hi-Wall chambered in this round.</p><p>gary</p></blockquote><p></p>
[QUOTE="Trickymissfit, post: 868909, member: 25383"] the 250AI's only draw back is that the neck length is a little on the short side before fire forming, and you'll loose another .035". The good side is that you'll never have to trim cases often. Personally, I'd form my cases from .243 brass as you'll see less brass movement during fire forming. Plus you can trim the necks to the max the chamber will allow before fire forming (-.010"). Brass may only shorten about .025" this way, and .243 brass is very common. I know a couple guys that shoot that round for ground hogs and coyotes all the way out to five hundred yards. If memory is right they pretty much use nothing but 85 thru 90 rain bullets. Both use short action Remingtons, and the loaded rounds cycle thru the action very well. I'd love to have a Hi-Wall chambered in this round. gary [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
Advice wanted on rifle calibers
Top