95gr berger in a 243AI

Discussion in 'Reloading' started by dcb, Aug 27, 2005.

  1. dcb

    dcb Well-Known Member

    Messages:
    47
    Joined:
    Jun 8, 2004
    Looking for some load s for this bullet in a 243//Ai
    anyone tried them?
    Dave
     

  2. Eaglet

    Eaglet Well-Known Member

    Messages:
    2,779
    Joined:
    Feb 2, 2005

  3. dcb

    dcb Well-Known Member

    Messages:
    47
    Joined:
    Jun 8, 2004
    Thanks, i never think to do a search.
     
  4. Aussie

    Aussie Well-Known Member

    Messages:
    250
    Joined:
    Apr 29, 2004
    Tried them in my 9 inch twist .243 AI . Couldn't get them to work at over 3200 FPS . Have read that 3150 is their accuracy limit . Too slow for me . Have a reputation for being a finicky projectile .
    The 88 gn low drag is apparently easier to get good accuracy from . If you have an 8 inch twist you could look at the 105's / 107's . A Max 105 will work in a 9 twist .
     
  5. LWolken

    LWolken Well-Known Member

    Messages:
    102
    Joined:
    Nov 30, 2004
    I've shot up to 46gr of RL 22 with good accuracy. Unfortunately I have not chronied the load yet. I have a 1-9" twist 30" Hart. I'd start around 43gr and work your way up. I am using Lapua Brass and Fed 210M primers. Bullets were seated .015" off the lands.

    Lance