7RM Loads For 140 Accubond?

Discussion in 'Reloading' started by MarkA, Jan 22, 2007.

  1. MarkA

    MarkA Well-Known Member

    Messages:
    214
    Joined:
    Dec 12, 2005
    Load data for 7MM Rem Mag and 140 Accubond would be appreciated.
     
  2. remingtonman_25_06

    remingtonman_25_06 Well-Known Member

    Messages:
    2,030
    Joined:
    Jun 4, 2003
    I shoot the 140g Btip w/68.5g RL-22. The AB should give similar results. I get 3250fps out of my rem 700 7 RM w/24" factory tube.
     

  3. keithcandler

    keithcandler Well-Known Member

    Messages:
    187
    Joined:
    Jan 30, 2005
    I shoot a Rem 700 LSS with a break on it. 64-65g of IMR 4350 in Rem brass, 9 1/2 primer, bullet touching the lands shoots sub 1/2" groups. You will have to tweek the load for the lot of powder. Brand of primer and Brass is critical in this load. In this gun, if I go to another brand of brass or change primer, groups open way up, Velocity is 3250 fps in this gun.