Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Reloading
7mm WSM
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="kbillet" data-source="post: 444879" data-attributes="member: 24333"><p>Group sizes were slightly better and I was shooting under less than ideal conditions. My primary interest was MV and anything that stood out. After reading different post on load development, I am wondering if part of the problem is with 64 gn. of 4831 and the OAL set at 2.985", the case has to much air space.</p><p>Should I will try 64 gn. with an OAL of 2.850? Is the 4831 to slow for the 22" barrel? Also I was shooting at 100 yds and have since read that the long boattails don't stabilize untill about 300 yds. so I should be doing load development at that range? I have ordered QuickLoad software to help. This site has an enormous amount of information and will take time to search the different forum post for valuable information. Thanks to anyone that is willing to mentor/help a newbie.</p></blockquote><p></p>
[QUOTE="kbillet, post: 444879, member: 24333"] Group sizes were slightly better and I was shooting under less than ideal conditions. My primary interest was MV and anything that stood out. After reading different post on load development, I am wondering if part of the problem is with 64 gn. of 4831 and the OAL set at 2.985", the case has to much air space. Should I will try 64 gn. with an OAL of 2.850? Is the 4831 to slow for the 22" barrel? Also I was shooting at 100 yds and have since read that the long boattails don't stabilize untill about 300 yds. so I should be doing load development at that range? I have ordered QuickLoad software to help. This site has an enormous amount of information and will take time to search the different forum post for valuable information. Thanks to anyone that is willing to mentor/help a newbie. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Reloading
7mm WSM
Top