Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Gunsmithing
7mm STW - Stuck cases, at wits end
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="JeffVN" data-source="post: 531136" data-attributes="member: 2261"><p>We've covered the chamber size so I'll offer something new for you to think about. I presume that you are trimming or at least measuring the brass that you are using. </p><p></p><p>I mention this because I had this exact same thing (difficult extraction from the chamber) happened to a friend of mine with his 7 WSM. New brass worked fine, but 2X fired brass would not extract (6 out ot 10 would stick in the chamber) from his custom chamber. Turns out the brass would grow between firings 1 and 2 and on the second firing, was just long enough to engage the end of teh chamber and then refuse to extract. I had also suffered from periodic difficult extraction, and yep the brass was right up at the trim length.</p><p></p><p>Hope you gedt your situation figured out. let us know what you find out.</p><p></p><p>JeffVN</p></blockquote><p></p>
[QUOTE="JeffVN, post: 531136, member: 2261"] We've covered the chamber size so I'll offer something new for you to think about. I presume that you are trimming or at least measuring the brass that you are using. I mention this because I had this exact same thing (difficult extraction from the chamber) happened to a friend of mine with his 7 WSM. New brass worked fine, but 2X fired brass would not extract (6 out ot 10 would stick in the chamber) from his custom chamber. Turns out the brass would grow between firings 1 and 2 and on the second firing, was just long enough to engage the end of teh chamber and then refuse to extract. I had also suffered from periodic difficult extraction, and yep the brass was right up at the trim length. Hope you gedt your situation figured out. let us know what you find out. JeffVN [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Gunsmithing
7mm STW - Stuck cases, at wits end
Top