Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Reloading
7mm rem. mag. Pressure ?'s
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="jrock" data-source="post: 1027281" data-attributes="member: 78569"><p>I too use ejector marks and bolt lift as my 700's firing pin hole is a bit over sized from the factory and craters primers and such. I have a couple pounds of 7828scc on the shelf but am using 68.2 grains of 7828 with .02" of jump and am running 3120 with the 168's with no pressure signs and sub MOA accuracy. 7828 is supposed to be the same as the ssc but I plan to work up when switching over. Found that 0.2 grains of powder and 0.01" of jump makes a difference so fine tuning was a must with my gun.</p></blockquote><p></p>
[QUOTE="jrock, post: 1027281, member: 78569"] I too use ejector marks and bolt lift as my 700's firing pin hole is a bit over sized from the factory and craters primers and such. I have a couple pounds of 7828scc on the shelf but am using 68.2 grains of 7828 with .02" of jump and am running 3120 with the 168's with no pressure signs and sub MOA accuracy. 7828 is supposed to be the same as the ssc but I plan to work up when switching over. Found that 0.2 grains of powder and 0.01" of jump makes a difference so fine tuning was a must with my gun. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Reloading
7mm rem. mag. Pressure ?'s
Top