Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
7mm Mag Hard Extraction
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="7stw" data-source="post: 491948" data-attributes="member: 22854"><p><strong><em>Well guys, I did call big Green, and they told methat i was looking at a 6to 8 week week at minimum. So i contacted my local guy whom I have the utmost faith in and he told me that he has seen this before and strongly beleives it to be a burr in the chamber and that he feels he can polish it out without damaging chamber. We examined the brass and you could clearly see roughness right ahead of the belt all the way around the brass. it was not deep, but upon firing, it "grips" the brass and won't let go with normal extraction assist with the bolt. Down time is less then a week, and for $60.00 , I consider myself lucky. It could be worse, but if this does not work, it is probably going to become a 7mm Ultra-mag. Or I may just re-barrel it with the help of Dan Lilja. I am confident that this will fix the problem. If not, we will see. AIM SMALL, MISS SMALL....7STWgun)lightbulb</em></strong></p></blockquote><p></p>
[QUOTE="7stw, post: 491948, member: 22854"] [B][I]Well guys, I did call big Green, and they told methat i was looking at a 6to 8 week week at minimum. So i contacted my local guy whom I have the utmost faith in and he told me that he has seen this before and strongly beleives it to be a burr in the chamber and that he feels he can polish it out without damaging chamber. We examined the brass and you could clearly see roughness right ahead of the belt all the way around the brass. it was not deep, but upon firing, it "grips" the brass and won't let go with normal extraction assist with the bolt. Down time is less then a week, and for $60.00 , I consider myself lucky. It could be worse, but if this does not work, it is probably going to become a 7mm Ultra-mag. Or I may just re-barrel it with the help of Dan Lilja. I am confident that this will fix the problem. If not, we will see. AIM SMALL, MISS SMALL....7STWgun)lightbulb[/I][/B] [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
7mm Mag Hard Extraction
Top