7mm-08 140gr TTSX

Discussion in 'Reloading' started by Deans, Dec 27, 2010.

  1. Deans

    Deans Member

    Messages:
    12
    Joined:
    Jul 10, 2008
    Looking for loads using this bullet. Plan on using for Elk this coming year.

    Thanks Deans
     
  2. Deans

    Deans Member

    Messages:
    12
    Joined:
    Jul 10, 2008
    Come on guys. Need some help here.


    Thanks Deans
     

  3. TJAY

    TJAY Well-Known Member

    Messages:
    193
    Joined:
    Jul 1, 2007
    I have two loads that worked for me.
    My #1 load is 47 Gr. H4350
    #2 is 45 gr. IMR4007
    These are both in Remington brass with WLR primers.

    Both average less than 1 MOA at 200 yards from a Remington 700 with a Mtn rifle barrel in a B&C Ti stock with a Burris 3x9.
     
  4. Shortmagman

    Shortmagman Well-Known Member

    Messages:
    447
    Joined:
    Feb 22, 2008
    I have not loaded the TTSX bullet in a 7mm-08, but I have limited experience with the TSX bullet in a 7mm-08. I have found that RL-19 works great in the Savage rifle that I load, so I have worked up a load using RL.-19 and the 140 grains TSX. I stopped at 50.0 grains, in RP cases, WLR primers for a velocity of about 2850 ft/sec out of a 22 inch barrel.
     
  5. Deans

    Deans Member

    Messages:
    12
    Joined:
    Jul 10, 2008
    Thanks guys. I really appreciate your help. Have copied & pasted both your loads.

    Deans