Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
7 Rem Ultra Mag & Berger 195
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="TwoMore" data-source="post: 1336548" data-attributes="member: 95166"><p>I am running A 7mm Ultra Rogue (7mm rum AI) I built just for the 195. I have tested RL 33 and wc 872. I am settling in on the 872 , lil cleaner than the 33, and it is shooting under .250 moa . A week ago I shot it at 420 yards and shot a good .786 group . the 33 I worked up to 96 grains 3281 but I doubt the brass would take to much there, specially in the heat, I settled in at 93 to 94. 93 is 3180, 94 is 3220 the 872 is almost identical just about a grain more to hit the same speed but the 872 seems to not mind the hot temps near as much as I have been shooting in. My chambering is pretty long in the lead with .260 FB and .949 bore rider. so with the freebore and bore rider lead it is 1.209, I jam the lands .005, if I pull off my ES gets a lil squirrely , but right now at 90+ temps it is usually under 20fps, still lookin for single digits lol but it is shootin well. The 33 has seen 12 fps ES but like is said it is pretty dirty, for me anyway.</p></blockquote><p></p>
[QUOTE="TwoMore, post: 1336548, member: 95166"] I am running A 7mm Ultra Rogue (7mm rum AI) I built just for the 195. I have tested RL 33 and wc 872. I am settling in on the 872 , lil cleaner than the 33, and it is shooting under .250 moa . A week ago I shot it at 420 yards and shot a good .786 group . the 33 I worked up to 96 grains 3281 but I doubt the brass would take to much there, specially in the heat, I settled in at 93 to 94. 93 is 3180, 94 is 3220 the 872 is almost identical just about a grain more to hit the same speed but the 872 seems to not mind the hot temps near as much as I have been shooting in. My chambering is pretty long in the lead with .260 FB and .949 bore rider. so with the freebore and bore rider lead it is 1.209, I jam the lands .005, if I pull off my ES gets a lil squirrely , but right now at 90+ temps it is usually under 20fps, still lookin for single digits lol but it is shootin well. The 33 has seen 12 fps ES but like is said it is pretty dirty, for me anyway. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
7 Rem Ultra Mag & Berger 195
Top