Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Reloading
6mm x .284 norma dies
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="AZShooter" data-source="post: 1755696" data-attributes="member: 5219"><p>Love this round!</p><p></p><p>I use Redding bushing die and body bump die also comp seater die.</p><p></p><p>If you are interested in more 6mm-284 load data ( I have two rifles):</p><p></p><p>Using necked down 6.5-284 lapua brass custom reamer with a .277" neck. Turned for .004" chamber neck clearance. </p><p></p><p>Fed 210 primers</p><p></p><p>Please work up to these loads as your rifle may be different. </p><p></p><p></p><p>Loads:</p><p>First is a sporter using 24" rem 243 takeoffs rechambered by me. Two loads:</p><p></p><p>55 gr nosler bt and 51 gr of Varget 4100 fps did go up to 4200 but accuracy suffered</p><p> </p><p>95 gr classic hunter and 51 gr of RL-17 Fed 210m 3495 fps</p><p></p><p>Second rifle using a Bartlein 26" 1in 7.5 twist that was originally 30" but throat shot out. I cut off rear of barrel and threaded and rechambered it to see if it would once again shoot and it does. Not shooting it too much, figure it will have a short second life.</p><p></p><p>Berger 105 hybrid @3465 fps 63.5 gr of RL-33 </p><p></p><p>(this has to be higher than what most barrels will yield. This is typical for what a 30' barrel yields. Think it has to do with the bore being so worn and perhaps a bit loose.</p></blockquote><p></p>
[QUOTE="AZShooter, post: 1755696, member: 5219"] Love this round! I use Redding bushing die and body bump die also comp seater die. If you are interested in more 6mm-284 load data ( I have two rifles): Using necked down 6.5-284 lapua brass custom reamer with a .277" neck. Turned for .004" chamber neck clearance. Fed 210 primers Please work up to these loads as your rifle may be different. Loads: First is a sporter using 24" rem 243 takeoffs rechambered by me. Two loads: 55 gr nosler bt and 51 gr of Varget 4100 fps did go up to 4200 but accuracy suffered 95 gr classic hunter and 51 gr of RL-17 Fed 210m 3495 fps Second rifle using a Bartlein 26" 1in 7.5 twist that was originally 30" but throat shot out. I cut off rear of barrel and threaded and rechambered it to see if it would once again shoot and it does. Not shooting it too much, figure it will have a short second life. Berger 105 hybrid @3465 fps 63.5 gr of RL-33 (this has to be higher than what most barrels will yield. This is typical for what a 30' barrel yields. Think it has to do with the bore being so worn and perhaps a bit loose. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Reloading
6mm x .284 norma dies
Top