6mm savage

Discussion in 'Guns For Sale' started by dragman, Mar 26, 2012.

  1. dragman

    dragman Well-Known Member

    Messages:
    1,448
    Joined:
    Dec 6, 2011
    I have my 6mm up for sale. It is a savae 110 long action Blued that has been trued and had trigger work (springs lightend around 8 ounces) has large bolt handle (stainless) It is sitting in a Blue thumbhole boyd feather weight varmint stock (while it fits the stock needs more wood taken out to float the barrel how I would like it.) It has an ER Shaw 6mm 8 twist barrel 26 inches heavy varmint style has 30 rounds shot for break in. Has weaver 20 MOA base and Burris signature Zee rings with a Tasco 6-24 varmint scope on it. Gun looks promising with both H4831SC and Reloader 22 while broken in. Would like $850 for the complete package shipped to your FFL.

    edit:
    also comes with new die's that have only loaded the 30 rounds.
     

    Attached Files:

  2. mrussell

    mrussell Active Member

    Messages:
    42
    Joined:
    Aug 4, 2006
    is that $850 as it sits in the picture?

    What grain bullet was you shooting? did you check the velocity on them?

    I have one in a rem SA, but I can only load it single shot due to the 95gr VLDs out to far, the mag wont allow them. But it is a shooter.
     

  3. dragman

    dragman Well-Known Member

    Messages:
    1,448
    Joined:
    Dec 6, 2011
    Yes the complete gun scope you see in the picture. I didn't check velocity's I did more break in than testing I used up some 105 Amax's with 4831SC and they shot right @ an inch at 100 yards I also tried 107 sierra's with reloader 22 and they shot .75" @ 100 with a three shot group. Barrel seems to not be picky on bullets. with the long action you can set them out as far as you want.
     
  4. dragman

    dragman Well-Known Member

    Messages:
    1,448
    Joined:
    Dec 6, 2011
    chamber is 6mm remington.
    Just got out of the shop and the barrel is fully free floated now. I have a bunch of 105 amax's so I may work up a load I will keep a round count for anyone who is interested.
     
    Last edited: Mar 26, 2012
  5. backwoods83

    backwoods83 Well-Known Member

    Messages:
    2,206
    Joined:
    Jan 8, 2011
    Any trades?
     
  6. dragman

    dragman Well-Known Member

    Messages:
    1,448
    Joined:
    Dec 6, 2011
    Trades possible what is it????
     
  7. backwoods83

    backwoods83 Well-Known Member

    Messages:
    2,206
    Joined:
    Jan 8, 2011
    I was just wondering if there was anything specific you may be looking for.
     
  8. Dogman24

    Dogman24 Active Member

    Messages:
    44
    Joined:
    Sep 28, 2011
    Those Boyd stocks are superb. I have the identical blue stock on a 110 in .243 Winchester. Its very simple to shave out the material using a dremel with a little time and patience. Just be sure to seal the wood up when done. I shimmed my front action screw after free floating the barrel. Gun went from shooting consistent 1" 5 shot groups with the factory synthetic to nice little 1/4" - 1/2" groups depending on the "heat" behind the bullet. This will make a great rifle for someone.
     
  9. dragman

    dragman Well-Known Member

    Messages:
    1,448
    Joined:
    Dec 6, 2011
    I would take for other guns, good optics, pistols. I am pretty open to a lot of things.
     
  10. dragman

    dragman Well-Known Member

    Messages:
    1,448
    Joined:
    Dec 6, 2011
    SPF