Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Reloading
6.8 Wester ADG Brass
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="jjh1" data-source="post: 3079472" data-attributes="member: 77499"><p>I appreciate it! So here goes, I bought ADG 7SAUM brass. Sized it and trimmed it. Wouldnt catch in the bolt face so I left the bullets out a bit so they would jamb into the lands when closing the bolt amd force the brass back into the bolt. I also removed the ejector pin from the bolt to help. Loaded some 150 gr bullets with 52 grains of IMR4350. 3 of 4 wouldn't fire, the one that did, the shoulder of the brass is crumpled in, see attached pic. Any ideas??[ATTACH=full]561567[/ATTACH]</p></blockquote><p></p>
[QUOTE="jjh1, post: 3079472, member: 77499"] I appreciate it! So here goes, I bought ADG 7SAUM brass. Sized it and trimmed it. Wouldnt catch in the bolt face so I left the bullets out a bit so they would jamb into the lands when closing the bolt amd force the brass back into the bolt. I also removed the ejector pin from the bolt to help. Loaded some 150 gr bullets with 52 grains of IMR4350. 3 of 4 wouldn't fire, the one that did, the shoulder of the brass is crumpled in, see attached pic. Any ideas??[ATTACH type="full"]561567[/ATTACH] [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Reloading
6.8 Wester ADG Brass
Top