Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Reloading
6.5x284 Ladder Test Results
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="NW Hunter" data-source="post: 1458531" data-attributes="member: 23024"><p>Just finished up a ladder test at 300 yards with H4831 loaded at .3 grain increments today.</p><p>Components are 3x fired Lapua brass, Remington 9 1/2 large rifle primers and Berger Hybrid 140's seated at 2.475" CBTO, .072" off the lands. </p><p>I got this seating depth with a seating depth ladder test at 300 yards.</p><p>On the 52.7 gr shot, I forgot to dial up 1 moa at the start of the ladder. </p><p>All the remaining shots had 1 moa dialed in.</p><p>All shots felt good, but looking at 53.6 gr., could I have pulled it out of the bottom node? </p><p>Or do you guys think 53.6 gr is part of a scatter node?</p><p>54.2 thru 54.8 may be where I work up again.</p><p>Primers not flattened, no stiff bolt and case heads all at .499" still.</p><p>Looking for any experienced thoughts.</p><p></p><p>[ATTACH=full]101212[/ATTACH] [ATTACH=full]101213[/ATTACH]</p></blockquote><p></p>
[QUOTE="NW Hunter, post: 1458531, member: 23024"] Just finished up a ladder test at 300 yards with H4831 loaded at .3 grain increments today. Components are 3x fired Lapua brass, Remington 9 1/2 large rifle primers and Berger Hybrid 140's seated at 2.475" CBTO, .072" off the lands. I got this seating depth with a seating depth ladder test at 300 yards. On the 52.7 gr shot, I forgot to dial up 1 moa at the start of the ladder. All the remaining shots had 1 moa dialed in. All shots felt good, but looking at 53.6 gr., could I have pulled it out of the bottom node? Or do you guys think 53.6 gr is part of a scatter node? 54.2 thru 54.8 may be where I work up again. Primers not flattened, no stiff bolt and case heads all at .499" still. Looking for any experienced thoughts. [ATTACH=full]101212[/ATTACH] [ATTACH=full]101213[/ATTACH] [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Reloading
6.5x284 Ladder Test Results
Top