6.5 x 284

Discussion in 'Guns For Sale' started by seidersjoden, Oct 31, 2012.

  1. seidersjoden

    seidersjoden Well-Known Member

    Messages:
    184
    Joined:
    Oct 31, 2012
    This gun is Brand New basically, built in 2005 by Bill Shehane, I specified it to be built just like the 6.5 that he uses for competition with one addition and that was a bipod mount so I could use this for varmint hunting. I put 42 rounds through it, 30 of those where breaking in the barrel as per Bills instructions down to the T. I am a sniper myself so rest assured this gun was kept immaculate in a humidity controlled case the whole time I had it. 32" barrel, starts at 1 1/2" at the receiver then narrows down to 1 1/4" at the crown. It has a 14 1/2" pull, 8 1/2" barrel twist, and it has a 297 no turn neck so it can take different loads. It has a solid one piece Python receiver to hold the heavy barrel. I do not know the trigger pull but it is competition level, very light pull. The stock is laminated oak wood with a thumb hole for improved grip. I have rods, bore guides, and 10 of everything, i.e., brushes and bore punches for cleaning. I have the recommended load Bill uses for this gun in competitions. This system is ready to go, case included, scope not included. You get the gun, case, and all necessary cleaning supplies for $3,900. I travel a lot so the best way to reach me is by phone or email. 7577016266 or seidersjoden@gmail.com.
     

    Attached Files:

  2. paste

    paste Well-Known Member

    Messages:
    296
    Joined:
    May 17, 2009
    you stated in your original post that this rifle was built by bill shehane but i was curious as to why one of the pictures shows Baity's Custom stamped on the barrel.
    could you please clarify
     

  3. seidersjoden

    seidersjoden Well-Known Member

    Messages:
    184
    Joined:
    Oct 31, 2012
    That's the barrel company he uses, I believe he also uses Krieger barrels for his builds. If your truly interested you can call Bill and verify this.

    His website is scopeusout.com Bill and Diane (his wife) own the company
     
  4. seidersjoden

    seidersjoden Well-Known Member

    Messages:
    184
    Joined:
    Oct 31, 2012
    This gun is Brand New basically, built in 2005 by Bill Shehane, I specified it to be built just like the 6.5 that he uses for competition with one addition and that was a bipod mount so I could use this for varmint hunting. I put 42 rounds through it, 30 of those where breaking in the barrel as per Bills instructions down to the T. I am a sniper myself so rest assured this gun was kept immaculate in a humidity controlled case the whole time I had it. This gun has a Baity's, 32" barrel, starts at 1 1/2" at the receiver then narrows down to 1 1/4" at the crown. It has a 14 1/2" pull, 8 1/2" barrel twist, and it has a 297 no turn neck so it can take different loads. It has a solid one piece Python receiver to hold the heavy barrel. I do not know the trigger pull but it is competition level, very light pull. The stock is laminated oak wood with a thumb hole for improved grip. I have rods, bore guides, and 10 of everything, i.e., brushes and bore punches for cleaning. I have the recommended load Bill uses for this gun in competitions. This system is ready to go, case included, scope not included. You get the gun, case, and all necessary cleaning supplies for $3,900. I travel a lot so the best way to reach me is by phone or email. 7577016266 or seidersjoden@gmail.com.