6.5 wsm

Discussion in 'Guns For Sale' started by DCGS, Dec 3, 2012.

  1. DCGS

    DCGS <strong>Official LRH SPONSOR</strong>

    Messages:
    491
    Joined:
    Dec 5, 2007
    This one I built just to play with. I had sold my 7/300 so I needed one for myself. It shot really good all the way out to 1000yds. The barrell on it never quit gettings some copper so I talked with the manufactor and he sent me a new one. I haven't even chambered it yet so it will be a new gun at used price. Specs:

    Rem trued action with PTG fluted bolt, sako ext.
    #5 contour 1 in 8 finished at 26 inches, fluted
    A 3 McMillian Desert Camo pillar bedded, adj cheek piece
    Standard BDL Bottom metal
    jewell trigger
    20 moa rail
    K&G kote in earth tan
    SSG Slot port break

    This gun would run you 3000.00 if you built it from scratch. Used price 2500.00
     

    Attached Files:

  2. pallen1067

    pallen1067 Well-Known Member

    Messages:
    84
    Joined:
    Mar 23, 2012
    You did not mention the barrel manufacturer??

    Up for a trade?

    .338 Norma Mag?
     

  3. DCGS

    DCGS <strong>Official LRH SPONSOR</strong>

    Messages:
    491
    Joined:
    Dec 5, 2007
    I didn't tell the manufactor for a reason. I do a lot of buisness with them. Out of a 100 barrells this is the only problem I have ever had . I don't think people should trash a product or a person over a one time thing. As I stated they made it good no questions asked. I had a new barrel with in a week. As for a trade I can't hardly shoot someone elses build. Thanks Dan
     
  4. pallen1067

    pallen1067 Well-Known Member

    Messages:
    84
    Joined:
    Mar 23, 2012
    Understood. Thanks for the reply.
     
  5. Time Killer

    Time Killer Well-Known Member

    Messages:
    157
    Joined:
    Jan 26, 2011
    Sir, what is the estimated weight of this rifle?
     
  6. trevor73402

    trevor73402 Well-Known Member

    Messages:
    132
    Joined:
    Nov 6, 2009
    So, if the barrel has not been chambered yet, does it have to be a 6.5wsm? Could it not be any 6.5/.264 caliber chambering?

    The bottom metal in the picsl appears to be factory Rem DBM instead of BDL??

    Will you give the barrel manuf to the new owner, so they will know for resale purposes?
     
  7. DCGS

    DCGS <strong>Official LRH SPONSOR</strong>

    Messages:
    491
    Joined:
    Dec 5, 2007
    The rifle weighs about 8.5 lbs. These pics are when I put the rifle together the first time. It did have a rem det mag and I can put it or standard BDL setup. The rifle is not chambered. I can chamber it in any 6.5 caliber buyer wishes. Yes I will be glad to share the manufactor with the buyer. It is a cut rifled barrel. Dan
     
  8. Unoboats

    Unoboats Well-Known Member

    Messages:
    458
    Joined:
    Jun 22, 2012
    I'm interested in your set up on your utv. I've been planning to do something similar to my Yamaha Rhino. Could you send me some pics of set up? I plan to make it removable.
    Chip
    uno@netpat.net
     
  9. DCGS

    DCGS <strong>Official LRH SPONSOR</strong>

    Messages:
    491
    Joined:
    Dec 5, 2007
    I will try to get some detail pics. This one is removable, 8 bolts. Dan
     
  10. Unoboats

    Unoboats Well-Known Member

    Messages:
    458
    Joined:
    Jun 22, 2012
    Thanks Dan
    Chip
     
  11. oklarcher

    oklarcher Active Member

    Messages:
    32
    Joined:
    Aug 9, 2009
    I cant believe no one has jumped on this. Brand new barrel chambered in any 6.5 caliber you want. I have a rifle sale pending and if it goes through this baby is mine.
     
  12. rippit

    rippit Well-Known Member

    Messages:
    111
    Joined:
    Jul 26, 2011
    I will take it per our pm's . I'll give you a call.

    Thanks