Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
6.5 SHERMAN MAX/156 BERGER
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="codyadams" data-source="post: 2225733" data-attributes="member: 87243"><p>I have a 7 max being built on a long action Defiance anTI, with the Wyatt's 3.850" mag box as is standard for a defiance long action, so I could go to a larger cartridge eventually if wanted. I plan on attaching a synthetic material spacer at the rear of the mag box approximately .5" thick to bring the OAL down to 3.350", I am hoping that will make feeding smooth. My current plan is to drill two small holes through the rear of the magazine box and into the .5" spacer and attach it with superglue and a couple small 1/2" long screws, I think that should be secure, then shorten the follower as well. With the shortened OAL, I am hoping that will allow good feeding. We shall see!!</p></blockquote><p></p>
[QUOTE="codyadams, post: 2225733, member: 87243"] I have a 7 max being built on a long action Defiance anTI, with the Wyatt's 3.850" mag box as is standard for a defiance long action, so I could go to a larger cartridge eventually if wanted. I plan on attaching a synthetic material spacer at the rear of the mag box approximately .5" thick to bring the OAL down to 3.350", I am hoping that will make feeding smooth. My current plan is to drill two small holes through the rear of the magazine box and into the .5" spacer and attach it with superglue and a couple small 1/2" long screws, I think that should be secure, then shorten the follower as well. With the shortened OAL, I am hoping that will allow good feeding. We shall see!! [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
6.5 SHERMAN MAX/156 BERGER
Top