Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Gunsmithing
6.5 prc build
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="sable tireur" data-source="post: 1699096" data-attributes="member: 27307"><p>Are you the 'builder' or will you use a gunsmith for your build?</p><p></p><p>If you're using a gunsmith, it will help to ask him for his advice instead of trying to explain what we think is right. </p><p></p><p></p><p></p><p>If this is a standard short action with a .308 bolt face then you will need to open up the bolt face and add an extractor. At this point, we generally recommend truing or blueprinting the action. Or your could order a new bolt from PT&G then have the gunsmith fit it.</p><p></p><p>The feed ramp will require some adjusting.</p><p></p><p>The feed rails need to be opened.</p><p></p><p>You will need a new magazine and follower or convert to a DBM.</p><p></p><p>Enjoy!</p></blockquote><p></p>
[QUOTE="sable tireur, post: 1699096, member: 27307"] Are you the 'builder' or will you use a gunsmith for your build? If you're using a gunsmith, it will help to ask him for his advice instead of trying to explain what we think is right. If this is a standard short action with a .308 bolt face then you will need to open up the bolt face and add an extractor. At this point, we generally recommend truing or blueprinting the action. Or your could order a new bolt from PT&G then have the gunsmith fit it. The feed ramp will require some adjusting. The feed rails need to be opened. You will need a new magazine and follower or convert to a DBM. Enjoy! [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Gunsmithing
6.5 prc build
Top