Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Reloading
6.5 Creedmoor, 20" Barrel, load data?
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="Tex_Hunter" data-source="post: 1482377" data-attributes="member: 31749"><p>Have had great results with reloder 16 in multiple 6.5 Creedmoor rifles. It has given a solid 100-150fps over similar loads using H4350.</p><p></p><p>In my 22" Bergara HMR I'm currently running 43.3gr under a Hornady 143gr ELD-X for an avg 2791fps with SD of 9.5, and produces ~.3MOA groups in this combo. Pressure is generally good, but I did have a pierced primer last time I shot where ambient temps were 100+ in the shade and was noticing some faint ejector marks on the other cases. RE16 is magic in the 6.5 and as far as I can tell it is very forgiving as the worst accuracy I had during load testing was .7MOA, I took the load data for the 142gr SMK from Alliant and then started about 3grs lower and worked up in .3gr increments.</p></blockquote><p></p>
[QUOTE="Tex_Hunter, post: 1482377, member: 31749"] Have had great results with reloder 16 in multiple 6.5 Creedmoor rifles. It has given a solid 100-150fps over similar loads using H4350. In my 22" Bergara HMR I'm currently running 43.3gr under a Hornady 143gr ELD-X for an avg 2791fps with SD of 9.5, and produces ~.3MOA groups in this combo. Pressure is generally good, but I did have a pierced primer last time I shot where ambient temps were 100+ in the shade and was noticing some faint ejector marks on the other cases. RE16 is magic in the 6.5 and as far as I can tell it is very forgiving as the worst accuracy I had during load testing was .7MOA, I took the load data for the 142gr SMK from Alliant and then started about 3grs lower and worked up in .3gr increments. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Reloading
6.5 Creedmoor, 20" Barrel, load data?
Top