Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Reloading
6.5 cm lapua brass- ever seen this?
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="jsthntn247" data-source="post: 1497337" data-attributes="member: 14894"><p>Next time you resize, check your case to chamber fit by removing the firing pin from the gun and chambering a piece of brass after you size it and the Hornady gauge says .000 movement then bump back to .001 then .002. Etc. With the firing pin removed you will be able to feel the case to chamber fit and when the handle drops and you can't feel the case it's sized enough. That might be at .000, then you wright that number down and that is your headspace for that chamber and your Hornady gauge.</p></blockquote><p></p>
[QUOTE="jsthntn247, post: 1497337, member: 14894"] Next time you resize, check your case to chamber fit by removing the firing pin from the gun and chambering a piece of brass after you size it and the Hornady gauge says .000 movement then bump back to .001 then .002. Etc. With the firing pin removed you will be able to feel the case to chamber fit and when the handle drops and you can’t feel the case it’s sized enough. That might be at .000, then you wright that number down and that is your headspace for that chamber and your Hornady gauge. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Reloading
6.5 cm lapua brass- ever seen this?
Top