6.5-284 with Hybrid 100V

Discussion in 'Reloading' started by cornstalker, Apr 23, 2011.

  1. cornstalker

    cornstalker Well-Known Member

    Messages:
    317
    Joined:
    Aug 13, 2008
    Anyone have any goodies to share regarding H100V in a 6.5-284?

    139-142 grain bullets of course.....
     
  2. Jumpalot

    Jumpalot Well-Known Member

    Messages:
    384
    Joined:
    Oct 3, 2005
    Try sending a PM to my buddy "learning". He uses it with the 140 grn. Bergers. Great accuracy, but I'm not sure of his exact load.
     

  3. cornstalker

    cornstalker Well-Known Member

    Messages:
    317
    Joined:
    Aug 13, 2008
    I'll give it a whirl. Thanks.
     
  4. cfvickers

    cfvickers Well-Known Member

    Messages:
    372
    Joined:
    Jun 18, 2010
    Max load is 51.5 in both my rifles with 3.220 OAL. One loves it the other hates it. Velocity is a hair over 3000. My most accurate load in the one that likes it is 49.5 grains, Fed 210M primer, Lapua brass. From that rifle with only a 23 inch barrel velocity with this load runs about 2870.
     
  5. cornstalker

    cornstalker Well-Known Member

    Messages:
    317
    Joined:
    Aug 13, 2008
    Sweet, thanks. I appreciate the input guys.


    My Lapua brass and 139 grain Scenars should be in by Wednesday or so. I have a couple hundred GM210M's left too.

    The reason I want to use H100V is because it works great in my 6mm284 and 338 WM. I think it will work okay in the old lady's 7mm RM too. How nice would it be to have one powder for four cartridges.....

    Plus I have over seven pounds of it.