Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Reloading
6.5/284 loads
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="65WSM" data-source="post: 744354" data-attributes="member: 9551"><p>My handle is 6.5WSM (I own a bolt and a falling block for that cartridge) but I also have a M70 in 6.6-284. It is my favorite deer rifle. I tried MagPro with 130 Accubonds and found a lot of pressure South of 3200 fps. The SD was also not impressive (54). From my load notes below:</p><p></p><p> 130 AB MagPro 58.50 3117 CCI 250 54 </p><p> 3155 </p><p> 2.963 OAL Extractor Mark Stiff Bolt lift 5/10/2012 130 AB MagPro 59.00 3200 CCI 250 </p><p> </p><p> 3200 </p><p> </p><p> Very stiff pulled the rest of bullets 5/10/2012 58.5 gr of MagPro led to a stiff bolt lift and ejector mark over the headstamp on the case. I fired 59.0gr once and pulled the rest of the bullets. How much MagPro are you using? Is my primer the problem? Why was your velocity so consistent? </p><p></p><p> 130 AB N-560 56.90 3291 210M 7 </p><p>130 AB N-560 56.90 3283 CCI 200 20 </p><p> 130 AB N-560 56.60 3256 CCI 200 13 </p><p>130 AB 4000-MR 53.39 3164 Wolf 12 </p><p>130 AB N-560 56.40 3263 Wolf 17 </p><p> I have gotten better velocity with Vhitavuori N-560.</p></blockquote><p></p>
[QUOTE="65WSM, post: 744354, member: 9551"] My handle is 6.5WSM (I own a bolt and a falling block for that cartridge) but I also have a M70 in 6.6-284. It is my favorite deer rifle. I tried MagPro with 130 Accubonds and found a lot of pressure South of 3200 fps. The SD was also not impressive (54). From my load notes below: 130 AB MagPro 58.50 3117 CCI 250 54 3155 2.963 OAL Extractor Mark Stiff Bolt lift 5/10/2012 130 AB MagPro 59.00 3200 CCI 250 3200 Very stiff pulled the rest of bullets 5/10/2012 58.5 gr of MagPro led to a stiff bolt lift and ejector mark over the headstamp on the case. I fired 59.0gr once and pulled the rest of the bullets. How much MagPro are you using? Is my primer the problem? Why was your velocity so consistent? 130 AB N-560 56.90 3291 210M 7 130 AB N-560 56.90 3283 CCI 200 20 130 AB N-560 56.60 3256 CCI 200 13 130 AB 4000-MR 53.39 3164 Wolf 12 130 AB N-560 56.40 3263 Wolf 17 I have gotten better velocity with Vhitavuori N-560. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Reloading
6.5/284 loads
Top