Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Reloading
6.5-284 coal question
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="BrentM" data-source="post: 868408" data-attributes="member: 61747"><p>3.10 sounds like the bullet might be entering the lands and is being pushed back into the case. Based on these numbers the bullet is entering the lands .07 before the case is fulling inserted and bolt locked. I can not imagine any other reason for this occurance. My guess, let me know, is that after you chamber and cycle the bolt, the second cycle of the bolt you don't experience this bolt resistance.</p><p> </p><p>I don't know what book you used to develop the load but I would double check the numbers. Bullet types, weights, etc have to all be measured properly to ensure the correct seating depth is acheived. Two bad things that happen is high chamber pressure and the possibilty the bullet gets stuck in the lands when you try to remove the unfired cartridge. Now you have stuck bullet and powder all over inside your action.</p></blockquote><p></p>
[QUOTE="BrentM, post: 868408, member: 61747"] 3.10 sounds like the bullet might be entering the lands and is being pushed back into the case. Based on these numbers the bullet is entering the lands .07 before the case is fulling inserted and bolt locked. I can not imagine any other reason for this occurance. My guess, let me know, is that after you chamber and cycle the bolt, the second cycle of the bolt you don't experience this bolt resistance. I don't know what book you used to develop the load but I would double check the numbers. Bullet types, weights, etc have to all be measured properly to ensure the correct seating depth is acheived. Two bad things that happen is high chamber pressure and the possibilty the bullet gets stuck in the lands when you try to remove the unfired cartridge. Now you have stuck bullet and powder all over inside your action. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Reloading
6.5-284 coal question
Top