Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
50cal WSM
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="Deleted member 46119" data-source="post: 1251524"><p>Ok,</p><p></p><ul> <li data-xf-list-type="ul">A 50 BMG dummy case with a Barns Long Range Bore rider about 0.100 longer than book.</li> <li data-xf-list-type="ul">A 50 WSM dummy case with a Barnes Long Range Bird rider. Same seating depth.</li> <li data-xf-list-type="ul">A 50 WSM case, trimmed to 2.1, 91.5 H2O capacity. These were actually made by cutting down 300 RUM cases and running the custom internal tapered expander. I measured the case wall thickness, tapered from 4.9 to 5.12 to straighten the outside of the case wall.</li> <li data-xf-list-type="ul">My tapered expander </li> <li data-xf-list-type="ul">My Paul Bycal "Wildcatters set back die" for magnum cases. </li> <li data-xf-list-type="ul">The expanders I made for necking up stuff that is bigger than what the Sinclair will do.</li> <li data-xf-list-type="ul">The set back bushings. I used these to make my first xx-Nosler wildcats from RUM brass.</li> </ul></blockquote><p></p>
[QUOTE="Deleted member 46119, post: 1251524"] Ok, [LIST] [*]A 50 BMG dummy case with a Barns Long Range Bore rider about 0.100 longer than book. [*]A 50 WSM dummy case with a Barnes Long Range Bird rider. Same seating depth. [*]A 50 WSM case, trimmed to 2.1, 91.5 H2O capacity. These were actually made by cutting down 300 RUM cases and running the custom internal tapered expander. I measured the case wall thickness, tapered from 4.9 to 5.12 to straighten the outside of the case wall. [*]My tapered expander [*]My Paul Bycal "Wildcatters set back die" for magnum cases. [*]The expanders I made for necking up stuff that is bigger than what the Sinclair will do. [*]The set back bushings. I used these to make my first xx-Nosler wildcats from RUM brass. [/LIST] [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
50cal WSM
Top