Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
.338 Edge build help
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="ultraedge" data-source="post: 963925" data-attributes="member: 36257"><p>You can use a Wyatt's CFE-9 box. The receiver and stock will have to be altered to fit. This box will hold a cartridge with an oal of nearly 4". You can use the Wyatt's follower for center feed or lengthen a Remington follower for staggered feed. The lips on the top of the box will have to be bent depending on which follower is used. They function fine. I would also recommend having an M-16 extractor installed. If you have any questions, you can give me a call at 478-957-5213 . Gary Campbell</p></blockquote><p></p>
[QUOTE="ultraedge, post: 963925, member: 36257"] You can use a Wyatt's CFE-9 box. The receiver and stock will have to be altered to fit. This box will hold a cartridge with an oal of nearly 4". You can use the Wyatt's follower for center feed or lengthen a Remington follower for staggered feed. The lips on the top of the box will have to be bent depending on which follower is used. They function fine. I would also recommend having an M-16 extractor installed. If you have any questions, you can give me a call at 478-957-5213 . Gary Campbell [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
.338 Edge build help
Top