338 edge brass

Discussion in 'Reloading Equipment and Components' started by Sendero_Man, Jun 26, 2013.

  1. Sendero_Man

    Sendero_Man <strong>SPONSOR</strong>

    Messages:
    1,706
    Joined:
    Feb 4, 2007
    I have 85 pieces of 338 Edge brass

    some new 300 Ultra and some fired once/formed

    $80.00 shipped to lower 48 (CONUS)

    thanks
     
  2. wvhunter92

    wvhunter92 Well-Known Member

    Messages:
    118
    Joined:
    Apr 27, 2013
    Do you accept Paypal
     

  3. Sendero_Man

    Sendero_Man <strong>SPONSOR</strong>

    Messages:
    1,706
    Joined:
    Feb 4, 2007
    yes I do
     
  4. wvhunter92

    wvhunter92 Well-Known Member

    Messages:
    118
    Joined:
    Apr 27, 2013
    How many new Pieces ?
     
  5. Sendero_Man

    Sendero_Man <strong>SPONSOR</strong>

    Messages:
    1,706
    Joined:
    Feb 4, 2007
    About 30-31
     
  6. Sendero_Man

    Sendero_Man <strong>SPONSOR</strong>

    Messages:
    1,706
    Joined:
    Feb 4, 2007
    Brass is sold via PM

    Thanks
     
  7. Rugerdiggs

    Rugerdiggs Well-Known Member

    Messages:
    438
    Joined:
    Aug 2, 2011
    I know its sold but was it head stamped 338edge? I have been making all of mine from 300rum and I figured that's what this is but just curious.
     
  8. Sendero_Man

    Sendero_Man <strong>SPONSOR</strong>

    Messages:
    1,706
    Joined:
    Feb 4, 2007
    Yes it was 300 rum
     
  9. Rugerdiggs

    Rugerdiggs Well-Known Member

    Messages:
    438
    Joined:
    Aug 2, 2011
    Ok thanks, had heard talk of lapua making some thought by chance it came real, maybe it will later, thanks again.
     
  10. dbaileyg

    dbaileyg Member

    Messages:
    8
    Joined:
    Apr 13, 2012
    I had not heard Lapua might be making edge brass. I would be interested to know if this is more than just a rumor???

    The only 338 edge stamped brass I am aware of is from Bertram Brass out of Australia available through Shawn Carlock. I have not fired it yet as I am still working on the build but the brass appears to be top notch based only on initial inspection.
     

    Attached Files: