Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Gunsmithing
300WM to 300RUM?
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="J E Custom" data-source="post: 395853" data-attributes="member: 2736"><p>Reamers have a tendency to run centered even if the pilot does not touch if you go slow.</p><p></p><p>I was worried the first couple of times doing this but the chambers were as perfect as the chambers that were cut from scratch.</p><p></p><p>In the case of 300 Win to 300 rum the pilot will reach long before the chamber is finished</p><p>and if the reamer is set up correctly will end up perfect.</p><p></p><p>My preference is to set the shoulder back the length of the tenon and start there, but if the </p><p>barrel is already short you may loose 3/4'' and reduce velocity to much for your needs.</p><p></p><p>J E CUSTOM</p></blockquote><p></p>
[QUOTE="J E Custom, post: 395853, member: 2736"] Reamers have a tendency to run centered even if the pilot does not touch if you go slow. I was worried the first couple of times doing this but the chambers were as perfect as the chambers that were cut from scratch. In the case of 300 Win to 300 rum the pilot will reach long before the chamber is finished and if the reamer is set up correctly will end up perfect. My preference is to set the shoulder back the length of the tenon and start there, but if the barrel is already short you may loose 3/4'' and reduce velocity to much for your needs. J E CUSTOM [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Gunsmithing
300WM to 300RUM?
Top