Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Hunting
Long Range Hunting & Shooting
300 winmag help
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="Guest" data-source="post: 10314"><p>Well guys I have loaded more bullets for my 300 winmag and been to the range for another session.After more research and talking to other longer range shooters.I have tried the nosler 180gr accubond in front of IMR 7828.I started at 73.5gr and went to 75.5gr.Brass is second loaded, trimmed to same length winchester.Accuracy is at 1.4"{3 shot} with 75gr-75.5gr.Both groups had two shots at .75" and 1 shot .75" away.Nosler manual says MV is 2960-3000fps. I figured before I go away from the 180gr bullet I would try these new accubonds.Remember I was going to try 165gr bullets because of the 1-11 twist rate.I am using a frontbag/rest,rearbag setup.I have been using fed215 primers in all charges up to now and I am thinking of trying fed210m next.I have read more than once that the 210m will shrink groups shot with the 215.I am not at max charge yet with the 7828 but I am at 103% density and think the primer change is next.Any input on past history regarding the primer change or other would be appreciated.I really want to get to a load that will shoot 1 MOA,so I can use my Tikka for longer range hunting this fall.</p><p>I have'nt bedded the rifle yet but with the barrel free floating I thought I could get a decent load developed first.</p><p></p><p>[ 04-24-2004: Message edited by: ruttinbuck ]</p></blockquote><p></p>
[QUOTE="Guest, post: 10314"] Well guys I have loaded more bullets for my 300 winmag and been to the range for another session.After more research and talking to other longer range shooters.I have tried the nosler 180gr accubond in front of IMR 7828.I started at 73.5gr and went to 75.5gr.Brass is second loaded, trimmed to same length winchester.Accuracy is at 1.4"{3 shot} with 75gr-75.5gr.Both groups had two shots at .75" and 1 shot .75" away.Nosler manual says MV is 2960-3000fps. I figured before I go away from the 180gr bullet I would try these new accubonds.Remember I was going to try 165gr bullets because of the 1-11 twist rate.I am using a frontbag/rest,rearbag setup.I have been using fed215 primers in all charges up to now and I am thinking of trying fed210m next.I have read more than once that the 210m will shrink groups shot with the 215.I am not at max charge yet with the 7828 but I am at 103% density and think the primer change is next.Any input on past history regarding the primer change or other would be appreciated.I really want to get to a load that will shoot 1 MOA,so I can use my Tikka for longer range hunting this fall. I have'nt bedded the rifle yet but with the barrel free floating I thought I could get a decent load developed first. [ 04-24-2004: Message edited by: ruttinbuck ] [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Hunting
Long Range Hunting & Shooting
300 winmag help
Top