Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Reloading
300 WinMag and 210 VLDs loads needed
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="Greyfox" data-source="post: 828971" data-attributes="member: 10291"><p>I haven't tried R22, but have used H4831sc, H1000, and Retumbo. Norma brass, 210 Hunting VLD's loaded -010" off the lands, Fed215's. I get .5MOA or better with all three powders out of my Rem 700 Milspec, 24" barrel. H4831sc - 72gr, 2800FPS, H1000 - 75.5gr, 2800FPS, Retumbo - 79gr, 2880FPS. I settled on Retumbo. In my rifle it gave the highest velocity, best ES in the 5-10FPS range, and I have found Retumbo to give excellent temperature stability. While I had no pressure signs, I'd still start a couple of grains lower with all these charges.</p></blockquote><p></p>
[QUOTE="Greyfox, post: 828971, member: 10291"] I haven't tried R22, but have used H4831sc, H1000, and Retumbo. Norma brass, 210 Hunting VLD's loaded -010" off the lands, Fed215's. I get .5MOA or better with all three powders out of my Rem 700 Milspec, 24" barrel. H4831sc - 72gr, 2800FPS, H1000 - 75.5gr, 2800FPS, Retumbo - 79gr, 2880FPS. I settled on Retumbo. In my rifle it gave the highest velocity, best ES in the 5-10FPS range, and I have found Retumbo to give excellent temperature stability. While I had no pressure signs, I'd still start a couple of grains lower with all these charges. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Reloading
300 WinMag and 210 VLDs loads needed
Top