300 Win Mag Load

Discussion in 'Reloading' started by scsims, Apr 7, 2008.

  1. scsims

    scsims Well-Known Member

    Messages:
    336
    Joined:
    Dec 10, 2007
    I plan on working up a load using 180gr Accubond bullets and I currently have H1000 powder. Is this powder a good chose for the 300 WM and 180 Accuonds?
     
  2. stxhunter

    stxhunter Well-Known Member

    Messages:
    422
    Joined:
    Aug 15, 2006
    i had better luck with h4831 in my 300wm 180 ab over 79gr 4831 fed 215 gm primer fed gm brass this was max load in my gun start lower and work up it gives me just over 3100 fps in a 26 inch hart barrel
     

  3. geargrinder

    geargrinder Well-Known Member

    Messages:
    1,972
    Joined:
    Nov 6, 2006
    I'm using 81.5g of H1000 with a 190g Berger VLD. I'm shooting 5 shot groups right at .5 MOA. I would say it is a great powder for the accubond.
     
  4. ackleyfan

    ackleyfan Well-Known Member

    Messages:
    54
    Joined:
    Jan 2, 2005
    Try IMR 4831,Win cases,Fed 210M primers,My best accuracy was at 72.5 -73.0 grains,But start low and work up! Good luck!