300 win mag load

Discussion in 'Reloading' started by popwarlick, Jan 21, 2008.

  1. popwarlick

    popwarlick Member

    Messages:
    15
    Joined:
    Jan 21, 2008
    Shooting a 300 win mag rem sen. I would like to shoot 180gr accubond Does anyone have a load for this bullet.
     
  2. stxhunter

    stxhunter Well-Known Member

    Messages:
    422
    Joined:
    Aug 15, 2006
    i shoot 79 gr h 4831 with them gives me 3106 fts max load in my rifle start lower very accurate for me
     

  3. popwarlick

    popwarlick Member

    Messages:
    15
    Joined:
    Jan 21, 2008
    stx,how far were you off the lands.Terry
     
  4. NYLES

    NYLES Well-Known Member

    Messages:
    773
    Joined:
    Dec 18, 2006
    I load mine as long as I can and still work in the mag....cant remember enough of my load to post off top of my head but powder is H4831SC and 180AB's..Nosler brass.....shoots bug holes at a hundred!
     
  5. BigDaddy0381

    BigDaddy0381 Well-Known Member

    Messages:
    457
    Joined:
    Apr 30, 2007
    180 AB,fed210m primer with 76gr H4831 and rem brass.
    Shoots great in my gun.All the books say it's a HOT load though.
    Start lower around 73ge
     
  6. papa45

    papa45 Well-Known Member

    Messages:
    61
    Joined:
    Feb 22, 2005
    Shooting a Rem 700 with 24" barrel. 180 gr Accubond over 70.0 gr IMR 4350,
    Rem brass, WLRM primer, 0.015" off lands, 2980 fps.
     
  7. 300win

    300win Well-Known Member

    Messages:
    100
    Joined:
    May 9, 2006
    I have burned out several barrels shootin 180 ballistic tips with 70 gr of IMR4350. It is a very consistant load that always seems to shoot in a 300 wm. My other choices of powder RE22 and IMR4831.
     
  8. stxhunter

    stxhunter Well-Known Member

    Messages:
    422
    Joined:
    Aug 15, 2006
    oal is 3.34 not sure how far from the lands i will have to measure. my barrel is a 26 in hart and it well hold 1/2 moa at 500 yd conditions allowing
     
  9. NYLES

    NYLES Well-Known Member

    Messages:
    773
    Joined:
    Dec 18, 2006
    Anyone have these results with RL22 vs H4831SC or reg....the H4831 either version always seems to beat the RL22 accracy wise in both my 7REM and 300WM?

    These 2 powders keep comin up just wonderin
     
  10. chain

    chain Well-Known Member

    Messages:
    366
    Joined:
    Dec 28, 2004
    I have had good results with IMR 4831 close to max. I forget exactly but tight groups for me were right around 2900. Just had to keep messing around with powders and settled on RL 22 at about 2950 ( Max Load 75.5)
     
  11. roninflag

    roninflag Well-Known Member

    Messages:
    3,226
    Joined:
    Feb 27, 2006
    300 win loads

    i have loads with both i-4350 and re-22; lapua brass and either 215 or wlrm primer depends on which 300 win of mine you are talking about. roninflag
     
  12. popwarlick

    popwarlick Member

    Messages:
    15
    Joined:
    Jan 21, 2008
    i thank yall for the help.I was pretty close,i finally settled on re22,75.5gr.,cci Lr primers,.003 off lands.
     
  13. Jimm

    Jimm Writers Guild

    Messages:
    1,270
    Joined:
    Jun 12, 2007
    that has got to be

    pushing the pressure way up there . What length bbl ?

    Jim B.