300 win mag hunting load

Discussion in 'Reloading' started by Johnboy, Sep 25, 2009.

  1. Johnboy

    Johnboy Well-Known Member

    Messages:
    284
    Joined:
    Sep 25, 2009
    hello.I,m new to the site.I just got a 300 win mag and I,m looking for a hunting load.would like to use a 165g-168g bullet.I have 4831,7828,N170,varget,ramshot magnum,R15,and R25.I all so have in stock the 165gNBT,165g Accubonds,and some 180gNBTs if one thinks I should it.I have on order the 168g Berger vld .my barrel is 26" and has 1:10 twist.my other question is what powder works best in the case< slow/fast> burning powder.I am used to shooting a 223/308win and loading for these.hope that one can help me out.I really need some help.THANKS,Johnboy
     
    Last edited: Sep 27, 2009
  2. wadevb1

    wadevb1 Well-Known Member

    Messages:
    218
    Joined:
    Nov 16, 2004
    I would follow Noslers manual for charge and seat the Accubond for about .010 jump if your magazine will allow. H4831 has a huge following but I prefer Reloader 22. I have not tried RE-25 yet as I'm sitting on five pounds of 22.

    My favorite two loads is 72 grains Re-22 under a 180TTSX and a recent load I just developed with Bergers 168 VLD over 76 grains of Reloader 22. The Bergers are chrono'd at 3150.

    The barnes are jumping .040 and the Bergers are at .008-.010 off.

    I ran all kinds of Nosler loads from the book with no complaints.