Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Reloading
300 wby in a wby vanguard?
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="waldosec" data-source="post: 2477524" data-attributes="member: 18946"><p>The best advice I received when I learned to reload the 300 Wby in my MK5, is to seat the bullet out as far as possible, to the max length of the box magazine. </p><p>Make certain that when you load all three rounds in the box, that none will hang up. </p><p></p><p>My initial load was around 1 moa, took the above advice, it shrank to. 3 -. 4 moa. </p><p></p><p>Advice is only on Weatherby rifles with the freebore..</p><p>I also use a Lee Factory crimp die. </p><p></p><p>Over the years I have heard the same advice from many Wby reloaded, they too seen their groups shrink over 50% when bullets are seated to max. </p><p></p><p>Lastly, Fed 215 or 215M primers are highly recommended. </p><p></p><p>Good Luck</p></blockquote><p></p>
[QUOTE="waldosec, post: 2477524, member: 18946"] The best advice I received when I learned to reload the 300 Wby in my MK5, is to seat the bullet out as far as possible, to the max length of the box magazine. Make certain that when you load all three rounds in the box, that none will hang up. My initial load was around 1 moa, took the above advice, it shrank to. 3 -. 4 moa. Advice is only on Weatherby rifles with the freebore.. I also use a Lee Factory crimp die. Over the years I have heard the same advice from many Wby reloaded, they too seen their groups shrink over 50% when bullets are seated to max. Lastly, Fed 215 or 215M primers are highly recommended. Good Luck [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Reloading
300 wby in a wby vanguard?
Top