300 RUM Loads for 200 Grain Accubond

Discussion in 'Reloading' started by rangerman, Jul 15, 2011.

  1. rangerman

    rangerman Well-Known Member

    Messages:
    742
    Joined:
    Jul 16, 2007
    I would appreciate any load data you could share with me for the 300 RUM with the 200 grain accubond. I have worked up a very accurate load using the 208 grain amax but would like to also work up a load using the accubond in the event I have an opportunity to hunt elk and bear this fall.
    Thanks.
     
  2. lamiglas

    lamiglas Well-Known Member

    Messages:
    603
    Joined:
    Mar 20, 2008
    We use between 90 to 91.5 of h1000 in 3 different rifles with great results. we're seating to magazine length and using cci 250' s
     

  3. Eaglet

    Eaglet Well-Known Member

    Messages:
    2,779
    Joined:
    Feb 2, 2005
    Please remember, what may be safe in my rifle might no be safe in yours. Always start about 10% low and work your way up. Be safe and good shooting!

    Rifle: Remington Sendero 700 300 RUM

    200grAB300rum.jpg
     
  4. rangerman

    rangerman Well-Known Member

    Messages:
    742
    Joined:
    Jul 16, 2007
    Thanks guys for sharing your pet load information. It is very much appreciated. Anyone else with any load data? I plan to start load development for my 300 RUM very soon.
     
  5. edge

    edge Well-Known Member

    Messages:
    1,088
    Joined:
    Nov 4, 2005
    Delete me I misread the caliber, sorry :(
     
  6. rangerman

    rangerman Well-Known Member

    Messages:
    742
    Joined:
    Jul 16, 2007
    to the top
     
  7. gunaddict

    gunaddict Well-Known Member

    Messages:
    500
    Joined:
    Apr 18, 2010
    I just sold a gun I took in trade and it shot 5/8 groups . It was 87.5grs 7828 with 200gr Accubonds. Velocity was 3110. Factory gun.