30-06 auto

243hunter

Member
Joined
Jan 6, 2005
Messages
7
Location
MN.MPLS.ST.PAUL
hay guys I need some help I have a 30-06 rem.auto can anyone recomend a good accurate load I mean something to get me in the ballpark of obout 200yards thanks guy's
 
I worked with a friends rem auto last year. It was a good shooter with factory ammo and would do 1" to 1.25" with factory ammo. But we shaved that down to 3/4-1" with 55 grains of IMR 4350 and a couple different 165 bullets. Do a little research and see if you can come up with some accuracy loads in some manuals and use them. You probably want to stop about 1-2 grains short of max loads for an auto. Also, the above I4350 load didn't tear up the brass nearly as bad as the factory ammo when it was ejected.
 
Warning! This thread is more than 20 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.
Top