264 Win Mag ?

Discussion in 'Rifles, Bullets, Barrels & Ballistics' started by TR220swift, Mar 26, 2008.

  1. TR220swift

    TR220swift Active Member

    Messages:
    36
    Joined:
    Feb 13, 2008
    Wow I am lovin this forum. Anyone know what twist Rem. has for their Model 700 in CDL with fluted 26" Barrel? Cant find info from Rem. website or the paperwork it came with. How can I find out what it has, I know that there is a way with a cleaning rod and a patch? havent mess with it yet.
     
    Last edited: Mar 26, 2008
  2. HoytemanPA

    HoytemanPA Well-Known Member

    Messages:
    230
    Joined:
    Dec 16, 2001
    TR220swift,
    Welcome to long range hunting!
    It's easy to check the twist. Run a tight fitting patch 3/4 of the way down the barrel, then back and forth a little until it is freely moving in both directions. Take a piece of scotch tape about 1 1/2 inches long and wrap it around the cleaning rod exactly even with the end of your bore guide, sticking the two sticky sides of the tape together forming a pointer pointing straight up. Pull the rod back until the tape pointer points straight up again. Measure from the tape to the bore guide. The distance is your twist rate.
    Shummy