Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Reloading
.260 neck bushing, help please
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="J E Custom" data-source="post: 534747" data-attributes="member: 2736"><p>Normally you would go with .291 bushing if the loaded size is .294 to get around .003 thousandths</p><p>sizing. </p><p></p><p>Some brass has more spring back and you have to go .001 smaller.</p><p></p><p>After you size one, mic. it and see what size it realy is and this may help you decide on a bushing.</p><p></p><p>The bushing dies dont use an expander ball so the up stroke should be light. What you are feeling is the spring back.</p><p></p><p>If you try a .090 bushing and it works you will be fine until you anneal your brass and then you </p><p>may have to go back to the .091 bushing.</p><p></p><p>J E CUSTOM</p></blockquote><p></p>
[QUOTE="J E Custom, post: 534747, member: 2736"] Normally you would go with .291 bushing if the loaded size is .294 to get around .003 thousandths sizing. Some brass has more spring back and you have to go .001 smaller. After you size one, mic. it and see what size it realy is and this may help you decide on a bushing. The bushing dies dont use an expander ball so the up stroke should be light. What you are feeling is the spring back. If you try a .090 bushing and it works you will be fine until you anneal your brass and then you may have to go back to the .091 bushing. J E CUSTOM [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Reloading
.260 neck bushing, help please
Top