Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Hunting
Long Range Hunting & Shooting
260 loads?
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="shooter7" data-source="post: 1700214" data-attributes="member: 39303"><p>My gun likes the 143 ELD-x with a 42.4gr charge of H4350. I seat them to allow .010 clearance in the mag OAL 2.840". Of I recall, this is about a .065" jump to the lands. </p><p></p><p>I like Nosler brass and its proven to be consistent for me but my most recent batch of .260 Rem brass is from Starline. </p><p></p><p>Without neck turning or deburring flash holes I can get ES in the teens and SD in single digits over a 10 shot string.</p><p></p><p>I also use CCI 200 primers. Haven't felt the need to try anything different. </p><p></p><p></p><p>Unfortunately, my rifle is not a savage and wears a Krieger barrel, so this might all be irrelevant. Also, please note that I get ejector marks at <strong>42.7</strong>gr so this is a pretty spicy load. </p><p></p><p>Another load that works pretty good for me is the Berger 130 HVLD with 41.0gr H4350 loaded to mag length.</p></blockquote><p></p>
[QUOTE="shooter7, post: 1700214, member: 39303"] My gun likes the 143 ELD-x with a 42.4gr charge of H4350. I seat them to allow .010 clearance in the mag OAL 2.840". Of I recall, this is about a .065" jump to the lands. I like Nosler brass and its proven to be consistent for me but my most recent batch of .260 Rem brass is from Starline. Without neck turning or deburring flash holes I can get ES in the teens and SD in single digits over a 10 shot string. I also use CCI 200 primers. Haven't felt the need to try anything different. Unfortunately, my rifle is not a savage and wears a Krieger barrel, so this might all be irrelevant. Also, please note that I get ejector marks at [B]42.7[/B]gr so this is a pretty spicy load. Another load that works pretty good for me is the Berger 130 HVLD with 41.0gr H4350 loaded to mag length. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Hunting
Long Range Hunting & Shooting
260 loads?
Top