Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Gunsmithing
26 nosler factory rounds will not extract
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="sedancowboy" data-source="post: 1870804" data-attributes="member: 85874"><p>You can check primary extraction by either of two ways. One with a clear rifle put your thumb on the back of the bolt and lift the bolt handle slowly and see if you feel it moving backwards as the handle gets to the top of the stroke. Or you can make a witness mark with a sharpie on the front of the ejection port and as you lift the handle see if it moves back at the top of the stroke.</p><p>You can also watch the cam on the shroud to see if it contacts the slope on the action.</p><p>Does the handle lift up all the way without any resistance and it just won't travel backwards?</p><p>I will attach 2 pics the first of is of a 1999 with correct .023 primary extraction and the second with excessive .079 primary extraction.</p></blockquote><p></p>
[QUOTE="sedancowboy, post: 1870804, member: 85874"] You can check primary extraction by either of two ways. One with a clear rifle put your thumb on the back of the bolt and lift the bolt handle slowly and see if you feel it moving backwards as the handle gets to the top of the stroke. Or you can make a witness mark with a sharpie on the front of the ejection port and as you lift the handle see if it moves back at the top of the stroke. You can also watch the cam on the shroud to see if it contacts the slope on the action. Does the handle lift up all the way without any resistance and it just won't travel backwards? I will attach 2 pics the first of is of a 1999 with correct .023 primary extraction and the second with excessive .079 primary extraction. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Gunsmithing
26 nosler factory rounds will not extract
Top