Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Reloading
250 AI from Nosler 22-250 Cases
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="MagnumManiac" data-source="post: 1081713" data-attributes="member: 10755"><p>If the case length proves OK, try this, use a feeler gauge of around .005" under the case when FL Sizing, it goes under the case head and between the shell holder, try to chamber it, if it doesn't chamber, try going up in .002" larger feeler guages until a case chambers. I would not exceed .015", as this is beyond what can be fixed for use.</p><p>I think you may have a short chamber, and the fireformed brass was shot in an oversized chamber or one that wasn't negatively headspaced correctly.</p><p>Let me know how you get on, then I can advise on what to do next.</p><p>I have a 375 Weatherby that is .008" UNDER minimum SAAMI specs, so know how difficult this can be, but the fix is pretty simple if you want to use that brass you have.</p><p></p><p>Cheers.</p><p>gun)</p></blockquote><p></p>
[QUOTE="MagnumManiac, post: 1081713, member: 10755"] If the case length proves OK, try this, use a feeler gauge of around .005" under the case when FL Sizing, it goes under the case head and between the shell holder, try to chamber it, if it doesn't chamber, try going up in .002" larger feeler guages until a case chambers. I would not exceed .015", as this is beyond what can be fixed for use. I think you may have a short chamber, and the fireformed brass was shot in an oversized chamber or one that wasn't negatively headspaced correctly. Let me know how you get on, then I can advise on what to do next. I have a 375 Weatherby that is .008" UNDER minimum SAAMI specs, so know how difficult this can be, but the fix is pretty simple if you want to use that brass you have. Cheers. gun) [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Reloading
250 AI from Nosler 22-250 Cases
Top