P pjracer Well-Known Member Joined Jan 20, 2008 Messages 185 Oct 17, 2008 #1 can i buy norma or nosler 30-06 brass and run it through the 25-06 fl die to form them or are there steps in between that i must do? use .270 or .280 instead?
can i buy norma or nosler 30-06 brass and run it through the 25-06 fl die to form them or are there steps in between that i must do? use .270 or .280 instead?
G geargrinder Well-Known Member Joined Nov 6, 2006 Messages 2,024 Location Dayton, Nevada Oct 17, 2008 #2 That's all there is to it. 270 and 280 might be a good intermediate step, but if you are careful and lube well, you should be ok.
That's all there is to it. 270 and 280 might be a good intermediate step, but if you are careful and lube well, you should be ok.