Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Reloading
25-06 AI Redding Type S Bushings
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="BillR" data-source="post: 475082" data-attributes="member: 462"><p>Biggest question is this. Is this a tight neck chamber or just a standard neck chamber. Tight neck chambers are .282 and a PITA. Its also the reason for needing the bushing dies or otherwise you could get buy with a standard .25-06AI die and just clean up the necks.</p><p>I have the tight neck chamber of .282 and I trim all my necks down to .011 and this adds up to a total of .022 then add in the .257 bullet diameter and you have .279 diameter. I do not want anything more than .0015 clearance so if you add that together you have .003 which comes up to .282 total. Now I want about .003 neck tension so I take the .279 and subtract the .003 and I have a bushing of .276 Just make sure your annealing the cases or you will get spring back and the bullet will just fall into the case.</p></blockquote><p></p>
[QUOTE="BillR, post: 475082, member: 462"] Biggest question is this. Is this a tight neck chamber or just a standard neck chamber. Tight neck chambers are .282 and a PITA. Its also the reason for needing the bushing dies or otherwise you could get buy with a standard .25-06AI die and just clean up the necks. I have the tight neck chamber of .282 and I trim all my necks down to .011 and this adds up to a total of .022 then add in the .257 bullet diameter and you have .279 diameter. I do not want anything more than .0015 clearance so if you add that together you have .003 which comes up to .282 total. Now I want about .003 neck tension so I take the .279 and subtract the .003 and I have a bushing of .276 Just make sure your annealing the cases or you will get spring back and the bullet will just fall into the case. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Reloading
25-06 AI Redding Type S Bushings
Top