Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
.244 Ackley and 1000 yards
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="BountyHunter" data-source="post: 23385" data-attributes="member: 12"><p>Can you sight in for 30inches high at 100 yards with your current scope base and rings? If not, then you might have a problem with enough elevation to get to 1000 yards. Now a flat 6mm might only need 25-26MOA of elevation but if you can get 30 you know you are ok. Cheapest way to correct that problem if it is there is a set of burris signature rings with the insert kit (total cost under $50). You can change the inserts from front to back etc and get 30 MOA in the set up and still be optically centered.</p></blockquote><p></p>
[QUOTE="BountyHunter, post: 23385, member: 12"] Can you sight in for 30inches high at 100 yards with your current scope base and rings? If not, then you might have a problem with enough elevation to get to 1000 yards. Now a flat 6mm might only need 25-26MOA of elevation but if you can get 30 you know you are ok. Cheapest way to correct that problem if it is there is a set of burris signature rings with the insert kit (total cost under $50). You can change the inserts from front to back etc and get 30 MOA in the set up and still be optically centered. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
.244 Ackley and 1000 yards
Top