Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
24" 7mm Rem Mag Velocitys??? 168/180's
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="300rum" data-source="post: 841319" data-attributes="member: 6231"><p>Forgot to mention....</p><p>I'm using H-1000 batch from 1.5 years old (old batch what is not hot like the new one)</p><p>I to have marks on case primer area, but my max is 72gr and i'm shooting 70.5gr.</p><p></p><p>Load few more rounds in increment of 0.5gr and when you see flatened primer, or sticky bolt, or hard to extract case.... THAT IS YOUR MAX.</p><p></p><p>Make sure you back off one grain and play with seating depth to tighten the group.</p><p></p><p>Check the powder batch number to be the same.</p><p>If you have few different batch number - POUR ALL OF THEM IN ONE CONTAINER AND MIX THEM WELL - and then work your load up. (you will have consistent spread, group and velocity until you will finished all the mixed powder.</p><p></p><p>DO NOT MIX DIFFERENT BRANDS OF POWDER. use just H-1000</p></blockquote><p></p>
[QUOTE="300rum, post: 841319, member: 6231"] Forgot to mention.... I'm using H-1000 batch from 1.5 years old (old batch what is not hot like the new one) I to have marks on case primer area, but my max is 72gr and i'm shooting 70.5gr. Load few more rounds in increment of 0.5gr and when you see flatened primer, or sticky bolt, or hard to extract case.... THAT IS YOUR MAX. Make sure you back off one grain and play with seating depth to tighten the group. Check the powder batch number to be the same. If you have few different batch number - POUR ALL OF THEM IN ONE CONTAINER AND MIX THEM WELL - and then work your load up. (you will have consistent spread, group and velocity until you will finished all the mixed powder. DO NOT MIX DIFFERENT BRANDS OF POWDER. use just H-1000 [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
24" 7mm Rem Mag Velocitys??? 168/180's
Top