200gr Matchking data needed

winmagman

Well-Known Member
Joined
Mar 13, 2003
Messages
1,379
Location
Southern Wisconsin
I finally recieved my reloading equipment last Thursday. Since then I've been preping and priming cases. Now I think I'm ready to start throwing some powder. I'll be using 200 gr Accubonds and 200 gr Matchkings over Re22 and H1000. I have a Speer man. and the Nosler man. so I know what the max is for both powders with the Accubonds, but for the Matchkings I'm clueless. So if someone could take the time to look up and post the max for both powders with the Matchkings I would appreciate the effort. (need to know where to work back from)

Thanks in advance Chris
 
H-1000 From 67.3 grains to 80.0 grains
Winchester WLR Primer

RL-22 From 63.0 grains to 74.5 grains
Winchester WLR Primer

But you may be happier with:
RL-25 From 69.8 grains to 78.0 grains
Winchester WLR Primer
 
Warning! This thread is more than 21 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.
Top