200gr for 300 win

Discussion in 'Rifles, Bullets, Barrels & Ballistics' started by Nomad, Jul 18, 2010.

  1. Nomad

    Nomad Banned

    Messages:
    366
    Joined:
    Jul 1, 2007
    Drew a Moose tag and plan on using a new 300 win.
    Hope to get some information on the 200gr Accubond for hunting the
    moose with and some reloading data if anyone has it....
    Unknown distance, the rifle is a Rem 700 24in barrel.....
     
  2. MSLRHunter

    MSLRHunter Well-Known Member

    Messages:
    388
    Joined:
    Oct 3, 2009
    I have some of these bullets for my 300winmag, but have not loaded them yet. I am currently working on the 210gr berger vld on this rifle and hope to get some of the noslers loaded soon to compare. However, nosler says to load a max load of 79.5 gr of H-1000 which has been my best powder so far for the 300 winmag.
     

  3. winmagman

    winmagman Well-Known Member

    Messages:
    1,379
    Joined:
    Mar 13, 2003
    I load the 200 gr AB over 71 grs of Re 22 in Win. brass. Shoots at 2950 fps and groups .5 - .75 moa. Of coarse thats in my rifle. I've only used it on whitetails, but none of them ever complained:D.

    Chris
     
  4. hypersonic

    hypersonic Well-Known Member

    Messages:
    155
    Joined:
    Dec 12, 2005
    Currently running 79 grains of H-1000 with the 200 Accubond I am getting 2887 fps ave, consistantly under 1/2" at 100. This load is pretty warm for my 300 and primer pockets last for four loads using Win Brass. I am going to rework with Nosler brass and see if pocket life gets better. If not...... well no big deal just means new brass a little more often. Do not overlook H-4831 or RL-22 just depends on what your rifle likes.
     
  5. bassin93

    bassin93 Well-Known Member

    Messages:
    237
    Joined:
    Jan 31, 2009
    were loading 70 grns of IMR 4350 with a cci 250 mag primer and a 200grn Accubond. they were running 3023 out of a browning Abolt.
     
  6. FEENIX

    FEENIX Well-Known Member

    Messages:
    9,806
    Joined:
    Dec 20, 2008
    [​IMG]

    (100 yard group off SAKO M995 23 1/2" barrel)

    200gr NAB, 71.5gr H4831SC, CCI250, Federal brass, 3.62" (base to tip, not ogive) - still have plenty of room for refinement - no pressure signs thus far.

    Good luck!

    Ed
     
  7. woods

    woods Well-Known Member

    Messages:
    965
    Joined:
    Jun 4, 2006
    Start lower and work up in your rifle

    [​IMG]

    If I got much over 2900 fps accuracy went to hell
     
  8. Nomad

    Nomad Banned

    Messages:
    366
    Joined:
    Jul 1, 2007
    Thank you for your information.....
     
  9. Nomad

    Nomad Banned

    Messages:
    366
    Joined:
    Jul 1, 2007
    Ended with a very nice one hole group with RL-25 and Win brass shooting.
    Tried H-1000 and retumb as well did a load work up and the 200gr Accu bullets have
    done an outstanding job on paper.
    The season is a couple of weeks off......Thanks to all that helped.......Nomad.
     
  10. load

    load Well-Known Member

    Messages:
    366
    Joined:
    Jan 18, 2010
    imr 4350 68 grains (max by most books some list max at 67 grains)

    24" barrel+muzzle break 2925 fps

    or 73 grains imr 7828 @ 3000 same gun
     
  11. alaska

    alaska Well-Known Member

    Messages:
    619
    Joined:
    Feb 1, 2010
    IMR 4350 from 69.0 to 73.0 MAX
    I use the 200 gr Speer SP in my 300 Win.
    WW brass and FC215GM primer
    great moose load up around 3000fps + with 72.0
    Flat shooting past 400 yards.
     
  12. alaska

    alaska Well-Known Member

    Messages:
    619
    Joined:
    Feb 1, 2010
    Also H4831 @ 72.0 with the 200 gr AB works well in the 300 Win